The Milo, our biggest motion control rig

It offers the stability of big studio rigs, and yet it is transportable to almost any set.

Technical Information MILO rig:

Track: Precision Milo tracks (linear ball bearing rails), we offer 3 lenghts of 3.0 m in our standard package.
Max track speed 2m per second

Arm: Computerized arm extension
Max reach of camera 3m to each side of track
Max lens height: 3.85m
Minimum lens height: 25cm. below track

Head: Pan/Tilt and Roll axes
Takes cameras with 120m mags like Mitchell S35R, ARRI III,
ARRI 435, ARRI 16mm SRIII and also most Video cameras.

Lens control:Focus and zoom motors.

Mimic controls: Hand wheels for real time learning of pan and tilt movements.
Remote controls for focus and zoom.

Flair Software:

• - Continues shooting with 0,1-120 frames per second and stop motion.
• - Target tracking.
• - 3D data export of XYZ data CGI software like SoftImage, Maya, Kuper, LightWave and Alias-Wavefront.
• - Programming of output triggers, for example, to control flashlights, sound signals, special effects equipment.

Additional equipment and services:

• - Sync generator with Tri-level sync signal for synchronization with HD cameras
• - Hard disk recorder and video mixer to check multiple passes in real time.
• - Event controller to sync to SMPTE time code (music videos!)
• - Programmable model mover motor with a small turntable.
• - MC Tools software to generate files for Softimage, Maya, Alias Power Animator and Flame.

Power requirements:
110-240 Volts 16 Amp 50-60 Hz
Generator:6,5 KVA

We sent out our equipment with a motion control operator and motion control assistant